Viewing And Editing Policy Configuration; Policy Example - ZyXEL Communications GS2210 Series User Manual

21.2.1 Viewing and Editing Policy Configuration

To view a summary of the classifier configuration, scroll down to the summary table at the bottom
of the Policy screen. To change the settings of a rule, click a number in the Index field.
Figure 117 Advanced Application > Policy Rule: Summary Table

21.3 Policy Example

The figure below shows an example Policy screen where you configure a policy to limit bandwidth
on a traffic flow classified using the Example classifier (refer to
Figure 118 Policy Example
Chapter 21 Policy Rule
GS2210 Series User's Guide
164
Section 20.3 on page 160).