General Mvr Configuration - ZyXEL Communications GS2210 Series User Manual

Table 79 Advanced Application > Multicast > IPv6 Multicast > MLD Snooping-proxy > Filtering
Profile
LABEL
Delete
Delete
Cancel

23.6 General MVR Configuration

Use the MVR screen to create multicast VLANs and select the receiver port(s) and a source port for
each multicast VLAN. Click Advanced Application > Multicast > Multicast Setup > MVR to
display the screen as shown next.
Note: You can create up to five multicast VLANs and up to 256 multicast rules on the
Switch.
Note: Your Switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Chapter 23 Multicast
DESCRIPTION
To delete the profile(s) and all the accompanying rules, select the profile(s) that
you want to remove in the Delete Profile column, then click the Delete button.
To delete a rule(s) from a profile, select the rule(s) that you want to remove in
the Delete Rule column, then click the Delete button.
Click Delte button to permanently delete the entries you selected in the
Delete column.
Click Cancel to clear the Delete Profile/Delete Rule check boxes.
GS2210 Series User's Guide
186