Samsung SyncMaster 151S User Manual page 15

Setup
Connecting Your Monitor (SyncMaster 151BM)
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter,
and set the pins on your adapter(Adapter not included).
A PC-compatible computer does not need an adapter.
4. Connect the audio cable for your monitor to the audio port on the back of your computer.
Note : Turn on your computer and monitor. If your monitor displays an image,
installation is complete.
User's Manual 15