Lan 10/100M Ports; Power Socket - ZyXEL Communications PoE-10 User Manual

PoE-10 Single-port Power over Ethernet Injector
are located on the rear panel.

LAN 10/100M Ports

The PoE-10 has two LAN ports. The PWR&DATA port delivers power to your
PoE-enabled device. Use a straight-through Ethernet cable to connect the
PWR&DATA port to your PoE-enabled device.
The DATA port does not deliver power. Use an Ethernet cable to connect the
PoE-10's DATA port to the LAN.
The maximum Ethernet cable length is 100m.

POWER Socket

WARNING: Use only the included power adaptor. It is suitable for
desktop use. Use of another power adaptor may damage the
Connect the female end of the power adaptor to the PoE-10's POWER socket.
Connect the female end of the power cord to the power adaptor and the male end
to a power source (wall outlet or power strip).
PoE-10.
7