Table 5-1 Ves-1000 Series Switches: Led Descriptions - ZyXEL Communications VES-1008 Hardware Installation Manual

VES-1000 Series Ethernet Switch
LED COLOR
PWR Green
SYS Green
ALM Red
VDSL Green
10 Mbps Green
100 Mbps Yellow
5-2

Table 5-1 VES-1000 Series Switches: LED Descriptions

STATUS
ON The system is turned on.
OFF The system is off.
Blinking The system is rebooting and performing self-diagnostic tests.
ON The system is on and functioning properly.
OFF The power is off or the system is not ready/malfunctioning.
ON There is a hardware failure in the system.
OFF The system is functioning normally.
Blinking The system is transmitting/receiving to/from the VDSL modem.
ON The link to the VDSL modem is up.
OFF The link to the VDSL modem is down.
Blinking The system is transmitting/receiving to/from a 10 Mbps Ethernet network.
ON The link to a 10 Mbps Ethernet network is up.
OFF The link to a 10 Mbps Ethernet network is down.
Blinking The system is transmitting/receiving to/from a 100 Mbps Ethernet network.
ON The link to a 100 Mbps Ethernet network is up.
OFF The link to a 100 Mbps Ethernet network is down.
DESCRIPTION
Turning On Your Series Switch