Hydrostatic Ground Drive System; Tires & Wheels; Cutting Deck; Dimensions - Exmark Laser Z CT Operator's Manual

2.7 HYDROSTATIC GROUND DRIVE SYSTEM

2.7.1 Hydrostatic Pumps: Two Hydro Gear BDP-10A variable displacement piston pumps.
2.7.2 Wheel Motors: Two Hydro Gear wheel drive motors with 1 1/4" tapered shafts.
2.7.3 Hydraulic Oil: Use Mobil 1 15W-50 Synthetic Motor Oil.
2.7.4 Hydraulic Oil Capacity: 2.1 qt. (2.0 L.)
2.7.5 Hydraulic Filter: Replaceable cartridge type.
P/N 1-513211: 10 microns, 18 psi bypass (Summer use above 32° F (0°C))
P/N 1-523541: 40 microns, 18 psi bypass (Winter use below 32° F(0°C))
2.7.6 Speeds: All units: 0 – 7.2 mph (11.6 km/hr) forward.
2.7.7 Drive wheel release valves allow machine to be moved when the engine is not
running.
2.8 TIRES AND WHEELS
2.8.1 Tires:
Drive Tires
Front Caster Tires

2.9 CUTTING DECK

2.9.1 Cutting Width:
2.9.2 Discharge: Side (Optional Mulch or Bag)
2.9.3 Blade Size:
(3 ea.)
2.9.4 Blade Spindles: solid steel spindles with 1" (2.54 cm) I.D. bearings.
2.9.5 Deck Drive: Electric clutch mounted on vertical engine shaft. Blades are driven
by one "B" Section belt (w/self-tensioning idler) direct from the engine.
2.9.6 Deck: Full floating deck is attached to out-front support frame.
Maximum turf protection is provided anti-scalp rollers:
Deck design allows for bagging, mulching or side discharge.
2.9.7 Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1-1/2" (3.8 cm) to 4-1/2" (11.4 cm.) in 1/4" (.64 cm.)
increments.
The cutting height adjustment handle has a transport position and all
adjustments can be made while the operator remains seated.
2.9.8 Mulching Kit: Optional.

2.10 DIMENSIONS

2.10.1 Overall Width:
Without deck
Discharge chute up
Discharge chute down
2.10.2 Overall Length:
Roll Bar - Up
Roll Bar - Down
2.10.3 Overall Height:
0 – 4.0 mph (6.4 km/hr) reverse.
Size
20 x 10-10
11 x 4.00-5
44" deck
44 in. (111.8 cm)
44" deck
15.25 in. (38.7 cm)
44" and 48" Decks: Qty 3
52" Decks: Qty 5.
w/44" Deck
44 in. (111.7 cm)
47.4 in. (120.3 cm)
54.7 in. (138.9 cm)
44" Deck
73.9 in. (187.7 cm)
79.6 in. (202.2 cm)
Roll Bar - Up
69.4in. (176.3 cm)
12
Qty Tread
2 "Turf Mate"
2 Smooth
48" deck
47.2 in. (120.0 cm)
48" deck
16.25 in. (41.3 cm)
w/48" Deck
44 in. (111.7 cm)
50.3 in. (122.4 cm) 54.3 in. (137.9 cm)
58.1 in. (147.6 cm) 63.8 in. (162.1 cm)
48" Deck
73.9 in. (187.7 cm)
79.6 in. (202.2 cm)
Roll Bar - Down
51.3 in. (130.3 cm)
Ply Inflation
4 13 psi (90 kPa)
4 16 psi (110 kPa)
52" deck
52 in. (132.1 cm)
52" deck
18.00 in. (45.7 cm)
w/52" Deck
44 in. (111.7 cm)
52" Deck
75.5 in. (191.8 cm)
81.2 in. (206.2 cm)