Dimensions; Torque Requirements; Assembly Instructions; Uncrate Mower - Exmark Laser Z XP Operator's Manual

2.10.8 Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1 1/2" (3.8 cm) to 5" (10.2 cm.) in 1/4"(6.4 mm) increments
for. The cutting height adjustment handle has a transport position and all
adjustments can be made while the operator remains seated. Units also have a
foot operated deck lift assist lever to aid in raising the deck.
2.10.9 Mulching Kit: Optional.

2.11 DIMENSIONS

2.11.1 Overall Width:
60" Deck
72" Deck
2.11.2 Overall Length: 60" decks – 82.2 in. (208.8 cm)
2.11.3 Overall Height: 50 in. (127.0 cm) (height will vary slightly depending on seat setting)
2.11.4 Tread Width: (center to center of tires, widthwise)
Drive wheels: w/60" Deck – 42.8 in. (108.7 cm)
Casters: w/60" Deck – 38.9 in. (98.8 cm)
2.11.5 Wheel Base: (center of caster tire to center of drive tire)
w/60" Decks – 54.0 in. (137.2 cm)
w/72" Deck – 56.8 in. (144.3 cm)
2.11.6 Curb Weight
27 HP Daihatsu Diesel: w/60" Deck – 1565 lbs. (709 kg)
31 HP Daihatsu Gas: w/60" Deck – 1541 lbs. (699 kg)

2.12 TORQUE REQUIREMENTS

Bolt Location
Cutter Housing Spindle Nut ............................................ 75-80 ft-lbs. (102-109 N-m)
Blade Mounting Bolt........................................................ 115-120 ft-lbs. (156-163 N-m)
Engine Deck/Front Frame Mount .................................... 30-35 ft-lbs. (41-48 N-m)
Anti-Scalp Roller Bolts .................................................... 40-45 ft-lbs. (54-61 N-m)
Starter Mounting Bolts (M10) .......................................... 22-27 ft-lbs. (30-37 N-m)
Water Separator Mounting Bolts (M8) Diesel only........... 11-14 ft-lbs. (15-19 N-m)
Hydraulic Oil Filter Head Mounting Bolts (M6) ................ 60-72 in-lbs. (7-8 N-m)
Wheel Lug Nuts .............................................................. 90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts........................................... 72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut ................................................... minimum125 ft-lbs. (169 N-m)

3. ASSEMBLY INSTRUCTIONS

3.1 UNCRATE MOWER

3.2 SERVICE BATTERY.

WARNING: Battery posts, terminals, and related accessories contain lead compounds, chemicals known
to the State of California to cause cancer and reproductive harm. Wash hands after handling.
The machine is shipped with a filled lead acid battery.
3.2.1 Tilt seat up to gain access to the battery.
without deck
54.5 in. (138.4 cm)
58.5 in. (148.6 cm)
72" decks – 85.96. (217.2cm)
w/72" Deck – 46.8 in. (118.9 cm)
w/72" Deck – 47.6 in. (120.9 cm)
w/72" Deck – 1583 lbs. (718 kg)
w/72" Deck – 1542 lbs. (699 kg)
- 13 -
deflector up deflector down
61.4 in. (156.0 cm) 72.2" (183.4cm)
73.2 in. (185.9 cm) 84.3" (214.1cm)
Torque