Using The Remote Control - InFocus IN1112A User Manual

Using the remote control

The remote uses two (2) AA batteries (batteries not included). They are easily
installed by removing the cover from the remote's back, aligning the + and - ends of
the batteries, sliding them into place, and then replacing the cover.
Caution:
• When disposing of the batteries, be sure to do so in an environmentally proper
manner.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Ensure the batteries' polarity (+/-) is aligned correctly.
• Do not mix new and old batteries together, or different types of batteries
together.
• Replace the batteries as soon as they run out.
• Remove batteries from the remote control when storing or not in use for a
prolonged period.
To operate, point the remote at the front of the projector (not at the computer). The
range of optimum operation is about 30 feet (9 m).
Press the remote's Power button to turn the projector on and off (see page 11 for
shutdown info).
Press the remote's Menu button to open the projector's menu system. Use the arrow
buttons to navigate, and the Select button to select features and adjust values in the
menus. See page 24 for more info on the menus.
The remote also has:
• Volume buttons to adjust the sound.
• Custom button that can be assigned to a special function, like Blank Screen or
Freeze (see page 26).
• Source button to switch between sources.
• Blank button to blank the screen.
• Presets button to select stored settings (see page 25).
• Mute button to silence the audio.
• Auto Image button to resynchronize the projector to the source.
• Resize button to switch among aspect ratios (see page 29).
• Help button to provide interactive help for solving common, picture, sound,
and cabling problems.
Troubleshooting the remote
• Make sure the batteries are installed in the proper orientation and are not dead.
• Make sure you're pointing the remote at the front of the projector or at the
screen, not the computer, and are within the remote range of 30 feet (9 m). For
best results, point the remote at the front of the projector.
navigation
buttons
19