InFocus IN1112A User Manual page 50

1
Turn off the projector and unplug the power cord.
2
Wait 60 minutes to allow the projector to cool thoroughly.
3
Turn the projector upside down on a soft cloth so that the lamp door is facing
you.
4
Loosen the two captive screws on the lamp door and lift the door off.
5
Loosen the two captive screws that attach the lamp housing to the projector.
6
Carefully remove the lamp housing. Dispose of the lamp in an environmentally
proper manner.
7
Install the new lamp housing and tighten the screws.
8
Replace the lamp door.
9
Plug in the power cord and press the Power button to turn the projector back on.
10
To reset the lamp hour timer, navigate to the Advanced > Status/Service menu
and select Reset Lamp Hours. See page 31 for details.
49
loosen screw
loosen screw