LG 32LH250H Setup Manual page 25

Installer Menu Items 031 through 118
Menu Item Function
031 POLL RATE
032 TIMING PULSE
034 CAMPORT EN
035 COMPPORT EN.
038 YPrPb EN.
039 REAR AUX EN
040 AUTO CAMPORT
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 YPrPB2 EN
093 RJP AVAILABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
118 POWER SAVINGS
206-4118
Value Range Default Value
20 ~ 169 94
186 ~ 227 207
0 / 1 1
0 / 1 1
0 / 1 1
0 / 1 1
0 / 1 1
1 ~ 6, 255 6
0 / 1 0
0 / 1 0
0 / 1 1
0 ~ 7 2
0 ~ 7 2
0 / 1 0
0 / 1 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0 / 2 / 18 2
0 / 1 1
0 / 1 0
0 / 1 1
0 1 2 5 6 0
0 / 1 1
0 ~ 4 2
1 ~ 100,
200
101 ~ 200, 255
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0
0 / 1 0
0 / 1 0
1, 3, 7 3
Brief Description of Function and Comments
Selects poll rate for MPI.
Sets baud rate for MPI.
Set to 1 to enable Video 2 input.
Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1.
Set to 1 to enable display panel Component Video 1 input jacks.
Set to 1 to enable display panel Video 1 input jack.
Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE
Sets the starting Aux source.
Set to 1 for MPI Aux source to be reported as a channel number instead of Channel 0.
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Channel-Time display.
Chooses custom foreground color for the Channel-Time display.
Chooses custom background color for the Channel-Time display.
If set to 1 and Channel Override is 0, "NOT AVAILABLE" message is displayed when
directly accessing a channel not in the favorite Channel List.
If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows
Removes block hours setting for Parental Control and makes block permanent.
Set to 0 to disable RGB1. Set to 2 to enable for PC and Auto Configure always enabled.
Set to 18 to enable for PC and Auto Configure one time only after AC ON.
If set to 1, audio is muted if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 1 to enable HDMI 2 input.
Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See detailed descriptions.)
Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on Function Menu.
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Sets the brilliance of the TV picture backlighting. Settings above 101 control dynamic
back lighting and disable power savings mode.
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
Set to 0 for Normal. Set to 1 for Blank.
Set to 0 for Normal. Set to 1 to load presets of all above settings.
Set to 1 (b-LAN module is always powered), set to 3 (b-LAN module only powered when
TV is turned ON), or set to 7 (b-LAN module is never powered).
Installer Menu (Cont.)
cannot be set to 2.
®
-controlled systems.
Selects ATSC band.
25