Installer Menu - LG 32LH250H Setup Manual

Installer Menu

Use the Installer Menu to set up or change operational settings.
See more detailed descriptions of the Installer Menu items on the pages that follow.
Accessing the Installer Menu
Make sure the TV is ON. Using
the on-screen menu locks up, and then press 9-8-7-6 + ENTER to access the
Installer Menu. To exit the Installer Menu, press ENTER again. Any changes you
make will be stored in non-volatile memory.
The Installer Menu opens with item 000
arrow keys to sequence through the available menu items, or access an item
directly by keying in the line number and then pressing MENU. For example, to
access the SLEEP TIMER option, which is item 015, press 0-1-5 + MENU. To
change a setting, use the Left/Right arrow keys, or enter a value directly.
Using the Installer Menu
Items 000 ~ 118 are immediately accessible only upon entering the Installer
Menu. Refer to the table below as well as the following pages for item numbers,
descriptions, ranges, factory default settings, and a place for listing any changes
made on-site. Installer Menu items not relevant to this TV series are not present
on the Installer Menu; therefore, some numbers are missing. For example, items
006, 012, 013, etc. will not appear.
Installer Menu Items 000 through 030
Menu Item Function
000 INSTALLER SEQ
001 POWER MANAGE
002 AC ON
003 BAND/AFC
004 STRT CHANNEL
005 CHAN LOCK
007 STRT VOLUME
008 MIN VOLUME
009 MAX VOLUME
010 MUTE DISABLE
011 KEY DEFEAT
015 SLEEP TIMER
016 EN TIMER
017 ALARM
021 V-CHIP
022 MAX BLK HRS
023 CAPTION LOCK
028 CH. OVERIDE
029 OLD OCV
030 ACK MASK
24
an Installer Remote, press MENU repeatedly until
INSTALLER SEQ 000. Use the Up/Down
Value Range Default Value
0 ~ 3 0
0 ~ 7 0
0 / 1 0
0 ~ 3 1
0 ~ 127, 255 255
0 / 1 0
0 ~ 63, 255 255
0 ~ 63 0
0 ~ 63 63
0 / 1 0
0 / 1 0
0 / 1 1
0 / 1 0
0 / 1 1
0 / 1 1
0 ~ 99 12
0 / 1 0
0 / 1 1
0 / 1 0
0 / 1 0
000
UPN 000-000-000-000
PTC V1.00.000
Note: The Installer Menu header will vary
depending on the TV you are setting up.
Brief Description of Function and Comments
Leave default set to 0.
Sets number of hours of no activity before automatic shutoff.
Set to 1 to enable Auto Turn On at power up.
Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
Channel at turn-on. (Set to 255 to tune in last channel before power Off.)
If set to 1, cannot tune from current channel.
Sets volume level at TV turn-on. (Set to 255 to retain last volume level.)
Sets minimum allowable volume setting.
Sets maximum allowable volume setting.
Set to 1 to disable Mute Function.
Set to 1 to disable menu navigation keys on display panel.
Set to 1 to enable Sleep Timer.
Set to 1 to enable On/Off Timers.
Set to 1 to enable Alarm.
Set to 1 to enable V-Chip (Parental Control) functions.
Sets number of V-Chip blocking hours.
Set to 1 to retain caption setting at power off.
If set to 0, limits direct access to favorite channels.
Set to 1 to change MPI operation to OCV.
If set to 1, changes MPI for some OCV boxes.
XXLH250H INSTALLER MENU
INSTALLER SEQ 000
FPGA E0F1
CPU V3.06.00
Typical TV Installer Menu
206-4118