Cisco IOS XE Intelligent Services Configuration Manual page 140

How to Configure ISG Port-Bundle Host Key
•
•
Enabling the ISG Port-Bundle Host Key Feature in a Service Policy Map
Perform this task to enable the ISG Port-Bundle Host Key feature in a service policy map. The ISG
Port-Bundle Host Key feature will be applied to any subscriber who uses this service policy map.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
policy-map type service policy-name
Example:
Router(config)# policy-map type service
service1
Step 4
ip portbundle
Example:
Router(config-service-policymap)# ip portbundle
Step 5
end
Example:
Router(config-service-policymap)# end
What to Do Next
You may want to configure a method of activating the service policy map or service profile; for example,
control policies can be used to activate services. For more information about methods of service
activation, see the module
4
Configuring Port-Bundle Host Key Parameters, page 5
Verifying ISG Port-Bundle Host Key Configuration, page 8
enable
configure terminal
policy-map type service policy-name
ip portbundle
end
"Configuring ISG Subscriber
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
Enters global configuration mode.
Creates or defines a service policy map, which is used to
define an ISG service.
Enables the ISG Port-Bundle Host Key feature for the
service.
(Optional) Returns to privileged EXEC mode.
Services."
Configuring ISG Port-Bundle Host Key