Resolving Resource Conflicts In Windows Nt; Resolving Resource Conflicts In Windows 2000 - Cisco Aironet Installation And Configuration Manual

Chapter 9 Troubleshooting
Step 11 Click OK.
Step 12 Under Resource Settings or Resource Type, click Interrupt Request.
Step 13 Look in the Conflicting Device list at the bottom of the screen. If it indicates that the IRQ is being used
by another device, click the Change Setting button.
Step 14 Scroll through the IRQs in the Value dialog box and select one that does not conflict with another device.
The Conflict Information window at the bottom of the screen indicates if the IRQ is already being used.
Step 15 Click OK.
Step 16 Reboot your computer.

Resolving Resource Conflicts in Windows NT

Select Start > Programs > Administrative Tools > Windows NT Diagnostics.
Step 1
Click the Resources tab.
Step 2
Click the IRQ button.
Step 3
The used IRQs are listed in numerical order along the left side of the Resources window. Write down the
Step 4
number of an IRQ that is not being used; you will need it for Step 11.
Click the I/O Port button.
Step 5
Step 6 The used I/O ranges are listed in numerical order along the left side of the Resources window under
Address. Write down an I/O range that is not being used (for example, if range 0100-013F is followed
by 0170-0177 in the list, then 0140-0169 is an available range); you will need it for Step 13.
Double-click My Computer, Control Panel, and Network.
Step 7
Click the Adapters tab and select the Cisco Aironet Wireless LAN Adapter.
Step 8
Step 9 Click Properties.
Step 10 Select Interrupt under Property.
Step 11 Select the number of the unused interrupt from Step 4 in the Value drop-down box.
Step 12 Select IO Base Address under Property.
Select a value that is within the unused range you determined in Step 6. For example, if your unused
Step 13
range is 0140-0169, you could select 150.
Step 14 Click OK.

Resolving Resource Conflicts in Windows 2000

Double-click My Computer, Control Panel, and System.
Step 1
Click the Hardware tab and Device Manager.
Step 2
Double-click Network Adapters and the Cisco Systems Wireless LAN Adapter.
Step 3
In the General screen, the Device Status field indicates if a resource problem exists. If a problem is
Step 4
indicated, click the Resources tab.
Deselect the Use automatic settings check box.
Step 5
OL-1394-04
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Troubleshooting the Client Adapter
9-5