Using Eap-Sim; If You Are Prompted For The Pin - Cisco Aironet Installation And Configuration Manual

Chapter 6 Using EAP Authentication
Figure 6-13 Change PIN Screen
Step 2 Enter your new PIN in both the New PIN and Confirm New PIN fields.
Step 3 Enter a word that will help you to remember your PIN in the PIN Hint Phrase field.
Step 4 Click OK. The client adapter should authenticate using your new PIN.
Note

Using EAP-SIM

After you (or auto profile selection) select a profile that uses host-based EAP authentication and you
configure the card in Windows 2000 (with Service Pack 3 and the Windows 2000 Wireless 802.1X hot
fix) or XP for EAP-SIM authentication, the authentication process varies depending on the configuration
option you selected for the SIM card's PIN.

If You Are Prompted for the PIN

If you chose to be prompted for the PIN after a power-up or reboot or at every authentication request,
follow the steps below to EAP authenticate.
Note These instructions are applicable after profile selection, card ejection and re-insertion, reboot, or
logon.
OL-1394-04
You should use the new PIN for future authentication attempts.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows

Using EAP-SIM

6-17