Computer Screen Problems - Lenovo ThinkPad R61 Service And Troubleshooting Manual

Problem:
Solution:
Problem:
Solution:
Problem:
Solution:

Computer screen problems

Problem:
Solution:
The computer does not return from sleep (standby) mode, or the
sleep (standby) indicator stays on and the computer does not work.
If the system does not return from sleep (standby) mode, it may
have entered sleep (standby) or hibernation mode automatically
because the battery is depleted. Check the sleep (standby) indicator.
v If the sleep (standby) indicator is on, your computer is in sleep
(standby) mode. Connect the ac adapter to the computer; then
press Fn.
v If the sleep (standby) indicator is off, your computer is in
hibernation mode or power-off state. Connect the ac adapter to
the computer; then press power button to resume operation.
If the system still does not return from sleep (standby) mode, your
system may stop responding and you cannot turn off the computer.
Reset the computer. Unsaved data may be lost. To reset the
computer, press and hold the power button for 4 seconds or more.
If the computer is not reset, remove the ac adapter and the battery.
When you take action to return from sleep (standby) mode, the
computer display remains blank.
Check whether an external monitor was disconnected or turned off
while the computer was in sleep (standby) mode. If you
disconnected or turned off the external monitor, connect it or turn it
on before resuming the computer from the sleep (standby) mode.
When resuming the computer from the sleep (standby) mode
without attaching the external monitor or turning it on, and the
computer display remains blank, press Fn+F7 to bring up the
computer display.
Note: If you use the Fn+F7 key combination to apply a presentation
scheme, press Fn+F7 at least three times in three seconds, and the
image is displayed on the computer screen.
The computer enters sleep (standby) mode unexpectedly.
If the processor overheats, the computer automatically enters sleep
(standby) mode to allow the computer to cool and to protect the
processor and other internal components. Also, check the settings
for sleep (standby) mode, using Power Manager.
Incorrect characters appear on the screen.
Did you install the operating system or application program
correctly? If they are installed and configured correctly, have the
computer serviced.
Solving computer problems
Chapter 3. Solving computer problems
21