BayTech 24SII Owner's Manual page 93

You may now reconfigure another port, or exit by striking the Enter
key. The Model 24SII DES will now return to the main configuration
menu with a message at the end as follows:
Copyright (c) Bay Technical Associates, 1990
Model 24SII Data Exchange System
Total memory
This Module is 1
Status.......................................1
Program Port Logical Name....................2
Set Port Designation.........................3
Program Port Select Code.....................4
Set Port Select Mode.........................5
Set Serial Port Configuration................6
Set Input Inactivity Timeout.................7
Enable/Disable Form Feed Mode................8
Program I.D. Page Message....................9
Enable/Disable I.D. Page Message.............A
Select Print Schedule for I.D. Page..........B
Program Default Printer Assignment...........C
Exit Configuration...........................X
Change you devices to match new configuration
This message reminds you to change the serial configuration of the
devices connected to the reconfigured ports to match the new
configuration of the Model 24SII DES.
The new configuration will become effective after you have exited
configuration mode for the appropriate module and the Model 24SII
DES has reset.
The Model 24SII DES will now return to the main configuration menu
(see Section 8.1 ).
1M
Rev. 2.02