Table of Contents
Advertisement
/The following baud rates are supported for the two different printer
sharing modes:
Bidirectional: 300, 600, 1200, 2400, 4800, 9600, 19200,
38400, and 115.2k
Unidirectional: 9600, 115.2k, 230.4k, and 460.8k.
For example, to change the baud rate to 115.2K baud, send character
"2" (Set baud rate). The Model 24SII DES will respond with this menu
(when using bidirectional printer sharing mode):
1 for
300
2 for
600
3 for
1200
4 for
2400
5 for
4800
6 for
9600
7 for 19200
8 for 38400
9 for 115.2K
Enter Request :
Send "9" for 115.2K baud rate, and the Model 24SII DES will respond
with the reconfigured status of the port, the option menu, and the
prompt:
---------------------------------------------------
| Port |
Baud | Word | Stop |Parity|
|
|
Rate | Size | Bits |
---------------------------------------------------
|
2
| 115.2K|
--------------------------------------------------
Exit/Save......1
Set Baud Rate..2
Set Word Size..3
Enter Request :
You may now select other options from the menu to reconfigure Port
2. For example, to set XON/XOFF, send character "6" (Set
XON/XOFF) in response to the prompt.
NOTE: XON/XOFF flow control may be enabled in both the transmit
and receive directions for bidirectional printer sharing mode.
XON/XOFF may be enabled in the receive direction only for
unidirectional printer sharing mode.
| Xmit | Recv |
8
|
1
|None
|
Set Stop Bits.....4
Set Parity........5
Set XON/XOFF......6
Xon / Xoff |
Off | Off
|
Advertisement
Table of Contents
