Whirlpool PORTABLE AIR CONDITIONER Use & Care Manual page 9

1. Select the mode. See "Mode."
2. Select the fan speed. See "Fan Speed."
3. Set the temperature. See "Temperature."
4. Press POWER to start the air conditioner.
5. The RUN indicator light will glow green.
6. When WATER FULL indicator light glows red, air conditioner
will turn off automatically. See "Portable Air Conditioner Care"
for directions on draining the air conditioner.
Mode
1. Press MODE until you see the symbol glow for the desired
setting.
2. Choose Cooling, Dry, Fan Only or 6
Cooling—Cools the room. Press FAN SPEED to select
Auto, High or Low. Press the plus or minus button to
adjust the temperature.
Dry—Dries the room. The air conditioner automatically
selects the temperature. The fan runs on Low speed only.
NOTE: Dry mode should not be used to cool the room.
Fan Only—Only the fan runs. Press FAN SPEED to select
High or Low.
NOTE: Auto fan speed cannot be selected in Fan Only
mode.
6 th Sense ™ System control—The air conditioner
automatically selects Cooling or Dry mode, depending on
the room temperature, and sets the temperature to 79ºF
(26ºC).
The temperature set point can be adjusted down to 75ºF
(24ºC) or up to 83ºF (28ºC). Press the plus or minus
button once to change the temperature 2ºF (1ºC) or twice
to change it 4ºF (2ºC).
th Sense ™ System control.
When the set point is increased, a line appears above the
th ™
6 Sense System control temperature line. When the set
point is decreased, a line appears below the 6
System control temperature line.
D
A. 6th Sense™ System control
symbol
B. Dry mode symbol
If the current room temperature is lower than the
temperature set point, Dry mode is selected. Fan runs on
Auto speed only.
If the current room temperature is higher than the
temperature set point, Cooling mode is selected. Press
FAN SPEED to select Auto, High or Low.
Fan Speed
1. Press FAN SPEED to choose the desired fan speed.
2. Choose Auto, High or Low.
Auto—automatically controls the fan speed depending on
the current room temperature and temperature control
setting.
NOTE: Auto fan speed cannot be selected in Fan Only
mode.
High—for maximum cooling
Low—for minimum cooling
th Sense
A
B
C
Low
C. 6th Sense™ System control
temperature line
D. Auto fan speed symbol
™
9