Whirlpool PORTABLE AIR CONDITIONER Use & Care Manual page 7

4. Open the window.
5. Measure the window opening.
If the window opening is too narrow for the window slider
kit, remove the inner slider section from the window slider
kit.
A
A. Inner slider section
B. Outer slider section
Using a saw, cut the inner slider section to fit the window
opening.
Slide the inner slider section into the outer slider section
of the window slider kit.
6. Place the window slider kit into the window, extending it to fit
the width of the window. Be sure the rain cover is on the
outside of the window.
NOTE: For casement window installation, the window slider
kit may be installed vertically with the window slider kit
opening at the bottom.
7. Insert ¹⁄₂" screw (provided) into the hole in the inner slider
section that is closest to the end of the outer slider section of
B
the window slider kit.
8. Close the window onto the window slider kit to secure.
A. To portable air conditioner
B. Outdoors
C. Rain cover
A
B
C
¹⁄₂
A. " screw (provided)
B. Inner slider section
C. Outer slider section
A
E
F
D. Window slider kit
E. Window exhaust adapter
F. Flexible exhaust hose
B
C
D
7