Speco N8 User Manual page 51

Indicates that sequencing mode is enabled.
Displays the current date and time.
Remote control ID display. If a remote ID is not set, the message "ALL" is
RC: ALL
displayed.
Displays the amount of recording on the hard disk from 0-99%.
Indicates that HDD is recycled.
Continuous recording in progress.
Manual recording in progress. To set the Manual recording mode, press the
Record button on the front panel.
Motion alarm recording in progress.
Sensor recording in progress.
Right click the mouse, and the quick operation window will be displayed as below.
Figure 5.1.2. Quick Operation Window
51