Table of Contents
Advertisement
Menu Item
Select a channel for applying the following settings using the mouse or the remote
SITE
control. To change the values of all channels, take the following steps. Select the
button
RECORDING
Assign the recording mode for the selected channel.
MODE
Options are: Continuous, Motion, Schedule or Disable.
SENSOR
Select the sensor setting for the selected channel.
RECORDING
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is up to 20 minutes.
POST EVENT
Set the post event recording time duration for the specified channel.
RECORD
(10~30 seconds)
AUDIO
Enable/disable audio recording for the specified channel.
SCHEDULE
Set the recording schedule.
Table 4.3.1. Menu Items in RECORD Setup Screen
to change the values of all channels.
Description
35
Advertisement
Table of Contents
