Table of Contents
Advertisement
Reference • Effects
D (D Pan)
[OFF, R, 99:01...01:99, L]
Panning (stereo positioning) of the signal from chan-
nel D. This will only appear if SERIAL, PARALLEL 1
or PARALLEL 2 settings are selected.
L
Left signal.
R
Right signal.
OFF
Channel D signal off.
1L/1R (Effect 1 Left/Right level)
[0...9]
This only appears if PARALLEL 3 setting is selected.
Effect 1 settings pages
Effect 2 settings pages
Mode
Arrangement Play
Backing Sequence
Song Play
Song Edit
Program
These pages contain the effect parameters selected on
the "Effect select" page. The parameters contained in
these pages will depend on the effects you have
Dynamic modulation
If an optional Korg XVP-10 or EXP-2 pedal controller
is connected to the ASSIGN PDL/SW jack, and you set
the Disk/Global mode "Page 14: Assignable pedal/
switch" to EFFECT CONTROL, a foot pedal can be
used to control the effects in various ways. The aspect
194
Page
"Page 12: Effect 1 settings", "Page 13:
Effect 2 settings"
"Page 14: Effect 1 settings", "Page 15:
Effect 2 settings"
"Page 7: Effect 1 settings", "Page 8:
Effect 2 settings"
"Page 11: Effect 1 settings", "Page 12:
Effect 2 settings"
"Page 20: Effect 1 settings", "Page 21:
Effect 2 settings"
0
Effect 1 (reverb) off.
1-9
Effect 1 level (reverb). The signal will
be mixed with channels A and B (not
effected).
2L/2R (Effect 2 Left/Right level)
[0...9]
This will only appear if PARALLEL 3 setting is
selected.
0
Effect 2 level(modulating) off.
1-9
Effect 2 level 2 (modulating). The sig-
nal will be mixed with channels A
and B (not effected).
selected. For more information on programming
effects, see forward in this chapter.
of the effect that can be controlled will depend on the
effect; for example it might be the balance between the
original sound and processed sound, the speed of
modulation, or the frequency that is being empha-
sized.
Advertisement
Table of Contents
