Before First Use - AEG L 99696 HWD User Manual

Use this function for laundry with hard
stains to remove. When you set this
function, put the stain remover into
compartment
8.12 TPM
Touch button TPM to:
• Decrease the maximum speed of the
spin phase of the programme.

9. BEFORE FIRST USE

1. Put a small quantity of detergent in
the compartment for washing phase.
2. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
9.1 Clock setting
After you set the language, the display
tells to set the clock. The hour digits
flash.
1. Turn the programme knob to change
the hour.
2. Touch Start/Pauze button to confirm
the selection.
The minute digits flash.
3. Turn the programme knob to change
the minutes.
4. Touch Start/Pauze button to confirm
the selection.
9.2 Change the time of the
day after the first activation
1. Touch the button Extra Spoelen and
the button Tijd Besparen at the same
time for some seconds.
The hour digits flash.
2. Turn the programme knob to change
the hour.
.
The programme duration
increases. This function is
not available with a
temperature lower than
40° C.
The display shows only
the spin speeds available
for the set programme.
• Deactivate the spin phase ( 'No spin'
function).
• Activate the Rinse Hold function.
Set this function to prevent fabric
creases. The appliance does not drain
the water when the programme is
completed.
8.13 Temp.°C
Touch this button to change the default
temperature.
Symbols and
3. Touch Start/Pauze button to confirm
the selection.
The minute digits flash.
4. Turn the programme knob to change
the minutes.
5. Touch Start/Pauze button to confirm
the selection.
9.3 Language setting
The first time you activate the appliance,
the display shows the default language
and tells you to confirm it or change it:
1. Turn the programme knob to set the
desired language.
2. When the display shows the
necessary language touch Start/
Pauze button to confirm the
selection.
9.4 Change the language after
the first activation
1. Touch button TPM and button
Vlekken/Voorwas at the same time
for some seconds.
2. When the display shows the
language set, turn the programme
knob to set the new language.
3. Touch Start/Pauze button to confirm
the selection.
ENGLISH 19
= cold water