Preparing Hard Disks - HighPoint RocketRAID 4320 User Manual

The in-band management software provides an access URL for each controller on the
system. You can access the RAID management interface for each controller through its
access URL.
Then Select the controller's Access URL by click the link
You will be asked for the User and Password to login. The default user name is
"RAID" and the initial password is "hpt". You can change the password after you
have logged in.

2 - Preparing Hard disks

Disks must be initialized before they can be configured into RAID arrays.
Normally, disks only have to be initialized once. The disk initialize process should only
take a few seconds.
Initializing disks may result in loss – do not initialize disks unless they are to be
configured into RAID arrays.
Initializing hard disks:
1) Select the "Manage -
2) Click on the "Initialize
interface screen.
Web RAID Management Interface
Device" function to access the device management page.
Devices" button towards the upper portion of the
http://127.0.0.1:7412
5-2