Disk Menu - HighPoint RocketRAID 4320 User Manual

RocketRAID 4320 BIOS Utility
Press [ALT + S] to open the "System" menu in the figure 1; then select "Supervisor
mode", and press ENTER. This will open the user authentication interface. Enter
the appropriate password and then press ENTER. The initial password is "hpt".

2 - Disk Menu

Press [ALT + D] to access the "Disk" menu.
View a disk
From the Disk menu, use the ↑ ↓ arrows keys to select a disk. After highlighting the
desired disk, select Disk->Information to view hardware data about this disk.
Disk initialization
Disks must be initialized prior to creating a RAID array. To initialize a disk, access the
Disk menu and highlight a disk using the ↑ ↓ arrows keys. Press ENTER to add the
disk to the initialization list. Repeat this procedure for each disk that requires
initialization. After selecting the required disks, select
Disk menu.
3-2
Disk->Initialize option from the