Network Features - HighPoint RocketRAID 4320 User Manual

Introduction
accessible during the migration process, and a base level of security is still active.
OCE, ORLM and the RocketRAID 4320
The RocketRAID 4320 supports both Online Capacity Expansion (OCE), and Online
RAID Level Migration (ORLM). Both features are supported by a single function - an
array can be transformed from one RAID level to another RAID level while simulta-
neously being resized, even under I/O load.
Spare disk
A spare disk is a single disk that can be used to automatically rebuild a redundant array
in case of drive failure. Spare disks may also be members of a RAID array. Any available
space on these disks may be used to rebuild other broken arrays.
Legacy disk
Disks attached to the RocketRAID 4320 that contain valid partition tables will be identi-
fied as legacy disks. A legacy disk attached to the RocketRAID 4320 can be accessed by
the operating system, but cannot be used to create RAID arrays. A legacy disk must be
initialized before assigning it to an array.
Monitor Features
Hardware Monitor function provides information of temperature,fan speed(I/O
Processor),and voltages of the RAID controller.

Network Features

The RocketRAID 4320 offers a selection of network-oriented RAID Management
functions. These features are integrated into the card's firmware, and can be adminis-
trated using the BIOS and Web-based management utilities.
SNMP Manager - Simple Network Management Protocol. Allows the administrator to
view the current state of the entire RAID system.
SNMP Trap - The RAID adapter can be configured to report events over the network.
When an event is generated by the RAID Management utility, the SNMP Trap will send
SNMP Trap messages to the Trap Receiver.
NTP - Network time protocol. The RocketRAID 4320's firmware automatically synchro-
nizes it's internal clock to match that of the selected server. If a NTP server is not
specified, the adapter will synchronize itself with the host system's BIOS clock.
1-5