Remote Control Display - Carrier Air V Owner's Manual

3
FAN SPEED SELECTOR BUTTON - Press this but-
ton to select the desired fan speed of HIGH, LOW
or AUTO in turn, and the fan will operate at the
selected fan speed. If you select " AUTO" , the fan
speed will be controlled by the microcomputer of
the unit.
5
TEMPERATURE SELECTOR BUTTONS - If you set
the desired room temperature, then the unit will
maintain the room temperature at the set
temperature. In COOL mode, if the room tempera-
ture is higher than setting, the compressor will be
automatically turned on to provide a cooling
effect. If the room temperature is lower than the
setting, the compressor will be automatically
turned off to stop cooling operation. However, the
fan will continue to circulate air even if the com-
pressor is turned off. In HEAT mode, if the room tem-

Remote Control Display

1
Indicates the selected operating mode.
2
Lights up when the signal from the remote control is transmitted. The receiving beep is heard from the unit.
3
Indicated the selected temperature.
4
Indicates the selected or remaining time of the ON TIMER and OFF TIMER modes.
5
Indicates the selected fan speed.
6
Indicates the selected timer mode, namely, ON TIMER or OFF TIMER mode.
TIMER
ON
FURN.
COOL
DRY
FAN
HEAT
4
ON TIMER BUTTON - When the unit is turned off,
press the ON TIMER button to select the desired
time, in hours, for the unit to turn on.
perature is lower than setting, the compressor will
be automatically turned on to provide a heat-
ing effect. If the room temperature is higher than
the setting, the compressor will be automatically
turned off the stop heating operation. However,
the fan will continue to circulate air even if the
compressor is turned off.
6
OFF TIMER BUTTON - When the unit is turned on,
press the OFF TIMER button to select the desired
time, in hours, for the unit to turn off.
OFF
AUTO
LOW
HIGH
' 6
OWNER S GUIDE -