Remote Control Display - Carrier Air V Owner's Manual

5
TEMPERATURE SELECTOR BUTTONS - If you set
the desired room temperature, then the unit will
maintain the room temperature at the set
temperature. In COOL mode, if the room tempera-
ture is higher than setting, the compressor will be
automatically turned on to provide a cooling
effect. If the room temperature is lower than the
setting, the compressor will be automatically

Remote Control Display

1
Indicates the selected operating mode.
2
Lights up when the signal from the remote control is transmitted. The receiving beep is heard from the unit.
3
Indicated the selected temperature.
4
Indicates the selected or remaining time of the ON TIMER and OFF TIMER modes.
5
Indicates the selected fan speed.
6
Indicates the selected timer mode, namely, ON TIMER or OFF TIMER mode.
TIMER
ON
FURN.
COOL
DRY
FAN
turned off to stop cooling operation. However,
the fan will continue to circulate air even if the
compressor is turned off.
6
OFF TIMER BUTTON - When the unit is turned on,
press the OFF TIMER button to select the desired
time, in hours, for the unit to turn off.
OFF
AUTO
LOW
HIGH
' 6
OWNER S GUIDE -