Wan Bandwidth Control - LevelOne WHG-1000 User Manual

3.4 WAN Bandwidth Control

Configure WAN Bandwidth Control, go to: System >> WAN Traffic.
The feature gives administrators control over the entire system‟s traffic though the WAN interface.
These parameters set here should not exceed the real bandwidth coming from your ISP. For example,
if your xDSL is 8Mbs/640kbs, you may input these two values here.
Available Bandwidth on WAN Interface:
Uplink: It specifies the maximum uplink bandwidth that can be shared by clients of the system.

Downlink: It specifies the maximum downlink bandwidth that can be shared by clients of the

system.
17