To Use An Ifit Workout - NordicTrack NTEX08011.1 User Manual

HOW TO USE AN IFIT WORKOUT
You must have an iFit module to use an iFit workout.
To purchase an iFit module at any time, go to
www.iFit.com or call the telephone number on the
front cover of this manual.
Note: To use an iFit module, you must have access
to a computer with an internet connection and a USB
port. You will also need an iFit.com membership. To
use a wireless iFit module, you must also have your
own wireless network including an 802.11b/g/n router
with SSID broadcast enabled (hidden networks are not
supported).
1. Begin pedaling or press any button on the
console to turn on the console.
When you turn on the console, the display will turn
on. The console will then be ready for use.
2. Make sure that the iFit module is inserted in the
console.
To use an iFit workout, make sure that the iFit mod-
ule is inserted in the console.
IMPORTANT: To satisfy exposure compliance
requirements, the antenna and transmitter in
the iFit module must be at least 8 in. (20 cm)
from all persons and must not be near or con-
nected to any other antenna or transmitter.
3. Select a user.
If more than one user is registered with your
iFit.com membership, you can switch users in the
iFit main screen. Press the increase and decrease
buttons next to the Enter button to select a user.
4. Select an iFit workout.
To select an iFit workout, press one of the iFit but-
tons. Note: Before some workouts will download,
you must go to www.iFit.com and add them to your
schedule.
Press the iFit button to download the next workout
in your schedule. Press the My Trainer button,
the My Maps button, the World Tour button, or the
Event Training button to download the next workout
of that type in your schedule. Press the Compete
button to compete in a race that you have previ-
ously scheduled. For more information about the
iFit workouts, please see www.iFit.com.
When you select an iFit workout, the display will
show the duration of the workout and the approxi-
mate number of calories you will burn. The display
may also show the name of the workout. If you
select a competition workout, the display may count
down to the beginning of the race.
5. Start the workout.
See step 3 on page 20.
During some workouts, the voice of a personal
trainer will guide you through your workout. You
can select an audio setting for your personal trainer
(see HOW TO CHANGE CONSOLE SETTINGS on
page 22).
To stop the workout at any time, stop pedaling. The
time will flash in the display. To resume the work-
out, simply resume pedaling.
6. Follow your progress with the display.
See step 4 on page 18.
The My Trail tab will show a map of the trail you are
walking or running or it will show a track and the
number of laps you complete.
During a competition workout, the Competition tab
will show your progress in the race. As you race,
the top line in the matrix will show how much of the
race you have completed. The other lines will show
other competitors. The end of the matrix represents
the end of the race.
7. Measure your heart rate if desired.
See step 5 on page 19.
8. Turn on the fan if desired.
See step 6 on page 19.
9. When you are finished exercising, the console
will turn off automatically.
See step 7 on page 19.
For more information about the iFit mode, go to
www.iFit.com.
21