Husqvarna Viking Eden Rose 250C Limited Edition User Manual page 3

A limited edition accessory foot package is packed in the box with your HUSQVARNA VIKING
EDEN ROSE™ sewing machine. The package contains the following optional presser feet:
GATHERING FOOT (4127971-45)
Gather fabric or gather and attach a ruffl e in one step. Suitable for light to medium
weight fabrics. Straight stitch, (left needle position), length 3 to 6. The longer the length,
the more fabric will gather. Snap on Gathering Foot.
For gathered fabric:
Place fabric under Gathering Foot and sew. Increase upper tension for tighter gathers.
To gather and attach gathered fabric in one step:
1. Place fabric to be gathered under the presser foot right side up.
2. Place fabric to have ruffl es attached to it in the groove of the foot right side down.
3. Sew, guiding the under fabric but do not hold it back. Keep the top fabric in the
groove moving it steadily as needed. Increase the stitch length, upper tension and
presser foot pressure for more gathers.
BRAIDING FOOT (4129898-45)
Couch or stitch braid or cord for decorative embellishment. Stabilize as needed.
Straight stitch, length 2.5 or Zigzag stitch, length 2 to 4, width wide enough to
go over braid or cord (or use decorative stitch).
1. Thread braid from top of foot into the guide hole and under the foot.
2. Lower the Presser Foot and stitch. The Gimping /Braiding Guide accessory
(412554445) will guide the braid as you sew.
CLEAR PIPING FOOT (4130971-45)
Insert packaged piping into seams and edges for a tailored fi nish. Cover cord with fabric for specialty piping. The clear
view allows you to see the piping placement and see exactly where you are stitching. The clear view enables you to see the
fi rst row of stitching and adjust your needle position to stitch next to the original row. Straight Stitch, length 2.5.
To Make Piping From Your Fabric:
1. Snap on the Clear Piping Foot.
2. Cut bias or crosswise grain strips wide enough to cover the cording plus
seam allowances.
3. Lay the cording on the wrong side of the fabric strip and wrap the fabric
over the cord.
4. Place the fabric and cord under the Clear Piping Foot with the cord in
the groove on the underside of the foot.
5. Sew. The groove will guide the cord so the fabric covers it evenly.
Hint: When you sew this piping into a garment, adjust the needle position so it stitches
one setting closer to the cord, to cover the fi rst stitching.
To Stitch Piping into a Seam
1. Snap on the Clear Piping Foot.
2. Place the piping along the seam line on the right side of the fabric and stitch in place with piping in the groove
of the foot.
3. Place the second piece of fabric on top with the right sides together.
4. Put fabric and piping layers under the piping foot with the piping in the groove on the underside of the foot. Sew.
The groove on the underside of the foot will guide the piping as you sew.
Hint: Notch the seam allowance of the piping on curves and corners.
PRESSER FOOT KIT
NG ® ®