Setting The Aux Mode; Setting The Picture Output; Setting The Bluetooth Connection (Bluetooth In) - Alpine INA-W900E Owner's Manual

01GB00INA-W900E.book Page 66 Monday, September 13, 2010 9:52 AM
Adjusting the Rear Camera Guide line
You can adjust the rear camera guide line position.
Further setting item: GUIDE LINE ADJUSTMENT
1
Touch [ ] of GUIDE LINE ADJUSTMENT.
The guide line adjustment screen is displayed.
2
Touch the guide line you intend to adjust.
3
Touch [ ], [ ], [
of the guide.
After moving the guide, when you touch [
the horizontal row are aligned in a row.
4
After the adjustment is completed, touch [OK].
You can touch [RESET] during adjustment to return to the
initial adjustment.

Setting the AUX Mode

Setting item: AUX IN
Setting contents: OFF / ON
OFF: AUX source is not displayed.
ON: AUX source is displayed.
• OFF is not displayed when the optional DVD player or DVD changer
is connected via Ai-Net. And the setting related AUX can not be
adjusted.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
After setting this item to ON, touch [
further setting items can be adjusted.
Adjusting the AUX name Mode
Further setting items: PRIMARY / SECONDARY*
2
Setting contents: OFF* / AUX*
EXT.DVD / DVD CHG / USB VIDEO
1
* When a USB Video box or TUE-T200DVB (both are sold separately
and cannot be connected at the same time) is connected, you can use
it to connect one more External Input device. Setting the Secondary
name can change the source name display of this device.
2
* The setting is only available for Secondary.
3
* The setting is only available for Primary.
• You can set Secondary name only when Primary name is set to
DVB-T (or USB VIDEO). And you cannot set the same name as in
Primary name.
• The selected name is displayed on the Source selection and Rear
selection screen.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
66
-EN
01GB05INA-W900E.fm
] or [ ] to adjust the position
], the guides in
] of AUX IN, the following
1
3
/ DVD / GAME / TV / DVB-T /
Adjusting the External Input Audio Level
Further setting item: LEVEL
Setting contents: LOW / HIGH
LOW: Decreases the external input audio level.
HIGH: Increases the external input audio level.
• This setting item is adjustable only when AUX IN is set to ON.
Switching the Visual Input Signal System
Further setting item: SIGNAL
Setting contents: NTSC/PAL
• The video input type can be changed.
• This setting item is adjustable only when AUX IN is set to ON.

Setting the Picture Output

Outputs the picture of the source selected on the INA-W900E connected
to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF / ON
OFF: The "RSE" item is not displayed on the SOURCE
selection screen.
ON: The "RSE" item is displayed on the SOURCE selection
screen.
Touch [RSE] to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
Setting item: BLUETOOTH IN
Setting contents: OFF / ON
OFF: Select to ignore any external interrupts.
ON: Set ON when the built-in BLUETOOTH function is
used. For details on the set up procedure, refer to
"BLUETOOTH Setup" on page 52.
ALPINE INA-W900E 68-16909Z25-A (EN)