2. Disconnect the socket
3. Remove the rubber cap
4. Umhook the bulb holder spring
remove the bulb
5. To install the headlamp, reverse the above
sequence.
CAUTION
The use of a lamp other than rules may
cause to occur the vehicle fire and to
damage at electric parts.
Surely use only the lamp of proper capaci-
ty.
from the headlamp.
.
.
◉ TURN SIGNAL LAMP
1.Remove the lens by removing the screw.
and
2. Push in the bulb, turn it to the counter-clock-
wise, and pull it out.
3. After stick in the new lamp, assemble the lens.
◉ TAIL/BRAKE LAMP
36