HYOSUNG Aquila Owner's Manual page 35

3. Loosen the front axle pinch bolt
4. Loosen the front axle
5. Carefully position a jack or block under
engine and raise until the front wheel is slight-
ly off the ground.
CAUTION
Improper jaking may cause damage to the
oil filter.
Do not apply the jack head to the oil filter
when jacking up the motorcycle.
6. Draw out the axle shaft.
.
.
7. Slide the front wheel forward.
8. To reinstall the wheel assembly, reverse the
sequence as described.
◉ REAR TIRE REPLACEMENT
1. Place the motorcycle on the center stand.
2. Remove the two screw
3. Remove brake adjuster nut, and remove
torque link nut after pulling off the cotter pin.
WARNING
A hot muffler can burn you. The muffler
will be hot enough to burn you for some
time after stopping the engine.
Wait until the muffler cools to avoid
burns.
34
and chain case.