Panasonic SA-AK310GC Service Manual page 43

Step 9 Tilt the cassette mechanism in the direction of arrow (1), and then remove it in the direction
of arrow (2).
Step 10 Unsolder the motor terminals.
Step 11 Remove 4 screws.
Step 12 Remove mechanism Deck P.C.B.
* The mechanism as shown below is for DECK1. For the one of DECK 2, perform the same
procedures.
Step 13 Release the 2 claws, and then remove the pinch roller (R), (F).
Step 14 Release ther 2 claws, and then remove the head connector.
Step 15 Remove 2 screws.
TOP PREVIOUS NEXT