Panasonic SA-AK310GC Service Manual page 20

7.3.2 Checking for the CD Servo P.C.B., Panel
P.C.B., Deck P.C.B., Transformer P.C.B. and
Power P.C.B.
TOP PREVIOUS NEXT
Follow the (Step 1) - (Step 2) of Item 7.1.
Follow the Disassembly for the CD Lid of Item 7.2.1.
The initial setting of CD unit must be completed. (Refer to the initial setting of CD unit in
Item 7.3.1).
Check for CD Servo P.C.B.
The initial setting of CD unit must be completed. (Refer to the initial setting of CD unit in item
7.3.1.)
Step 1 Push the power button and the power turns OFF.
Step 2 Remove the FFC boards.
Step 3 Remove the CD changer unit.
Step 4 Remove 4 screws.
Step 5 Remove the mechanism unit cover.
Check the CD Servo P.C.B. as shown below
Step 6 Lay the unit.
Step 7 Connect the FFC board (19 pin) from CD servo P.C.B..