Table of Contents
Advertisement
Step 14
Release the claw, and then remove the traverse deck ass'y.
Note:
Be careful not to lose the 3 floating spring because those will also be removed on removal of the
traverse deck ass'y.
Installation of the CD Servo P.C.B. after replacement
Step 1
Connect the FFC board.
Step 2
Install the CD servo P.C.B. in the traverse deck ass'y.
Step 3
Remove 3 screws.
Step 4
Solder.
Note for installation of the CD servo P.C.B.
Installation for traverse deck ass'y
Step 1
Install the traverse deck ass'y to the timing lever.
Step 2
Align the boss of traverse deck ass'y with the slot of traverse cam gear.
Hide quick links:
Advertisement
Table of Contents
