Kenwood DDX7025BT Instruction Manual page 65

REFERENCES
A lot of noise is generated.
• Turn off (uncheck) "VoiceOver" on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing Artwork.
• Operate the unit after the Artwork is loaded.
Videos cannot be played.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) . Other cables cannot be used.
No sound of videos comes out.
• Connect with USB Audio and Video cable
KCA-iP202 for iPod/iPhone except for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation) or KCA-HD100 and USB2.0 cable
through Lightning-Digital AV adapter for iPhone
5/iPod touch (5th Generation)/iPod nano (7th
Generation). Other cables cannot be used.
❏ Tuner
AME automatic presetting does not work.
• Store stations manually. (Page 21 )
Static noise while listening to the radio.
• Connect the aerial firmly.
❏ Digital Radio (DAB)
Cannot receive an ensemble.
• Your area is not covered by the ensemble.
The DAB aerial is not properly extended or
positioned.
• Adjust the aerial and try the ensemble scanning
again.
• Connect an active antenna (not supplied).
❏ AV-IN1/AV-IN2
No picture appears on the screen.
• Turn on the video component if it is not on.
• Connect the video component correctly.
❏ Bluetooth
Phone sound quality is poor.
• Reduce the distance between the unit and the
Bluetooth mobile phone.
• Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped while using a
Bluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth
phone.
• Turn off, then turn on the unit.
• (When the sound is not yet restored) connect the
player again.
The connected audio player cannot be
controlled.
• Check whether the connected audio player
supports AVRCP (Audio Video Remote Control
Profile).
Bluetooth device does not detect the unit.
• Search from the Bluetooth device again.
ENGLISH 65