Kenwood DDX7025BT Instruction Manual page 5

INITIAL SETTINGS
❏ Activating the security function
You can activate the security function to protect
your receiver system against theft.
1
Display the <System> setting screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <System> menu screen.
2
The security indicator on the monitor panel
flashes when the vehicle ignition is off.
To deactivate the security function: Select [OFF]
for <SI>.
Clock settings
1
Display the <TOP MENU> screen.
On the source control screen:
2
Display the <Setup> screen.
3
Display the <Clock> screen.
4
Set the clock time.
<NAV>* Synchronizes the clock time with
the connected navigation unit.
<Radio Data Synchronizes the clock time with
System> FM Radio Data System .
<OFF> Sets the clock manually. (See
below.)
When selecting <OFF>:
Adjust the hour (1), then adjust the minute (2).
• Press [Reset] to set the minute to "00".
5
Finish the procedure.
* Appears only when the navigation unit is connected.
ENGLISH 5