Using A Microphone - HP HB4 User Manual

44
user's guide
4 Click the option for the number of speakers to match your multi-channel speaker
system, and then click Apply.
To test the speakers (multi-channel speakers only), click the Test button.
NOTE:
The WinDVD control panel shows the speaker number being used. Click Stop.
5 Click OK.
If you want to play a stereo DVD, change the audio properties of WinDVD
NOTE:
to match the recorded DVD audio output.

using a microphone

Your PC comes with one microphone connector in the back of the PC. Some
models have a second microphone connector in the front of the PC. Only one
microphone connector works at a time, and the back connector is ready to use
unless you have the multi-channel audio speakers option. For PCs with the multi-
channel audio speakers option, the microphone connector in the front of the PC, if
present, is ready to use. See "using the microphone with multi-channel audio" on
page 45.
To use a microphone connected to the front of your PC (select models only), select
the working microphone.
If you connect your microphone to the back of your PC, you do not need to
NOTE:
perform this procedure.
1 Double-click the Volume icon on the taskbar. The Volume Control settings
window opens.
If you do not see this Volume icon, click Start, click Control Panel,
NOTE:
click Sounds, Speech, and Audio Devices, if it is present, and then
double-click Sounds and Audio Devices to open the Sounds and Audio
Devices Properties window. On the Volume tab, place a check in the Place
volume icon in the taskbar check box. Click Apply, and then click OK. The
Volume icon appears in the taskbar.
2 Select Options and click Properties.
3 In Adjust volume for, click Recording.
4 In Show the following volume controls, place a check in the Microphone
check box.
5 Click OK.