Front-Facing Webcam/Microphone Module - HP ZBook x2 Maintenance And Service Manual

Front-facing webcam/microphone module

Description
Front-facing webcam/microphone module (includes camera bracket, cables, and double-sided adhesive)
Microphone module (includes cable and double-sided adhesive)
Before removing the front-facing webcam/microphone module, follow these steps:
1. Shut down the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the tablet.
3. Disconnect the power from the tablet by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the tablet.
4. Remove the display panel assembly (see
Remove the front-facing webcam/microphone module:
1. Disconnect the front-facing webcam/microphone module cables (1) from the system board.
2. Remove the two Phillips M2.0×3.0 screws (2) that secure the camera bracket to the back cover.
3. Remove the camera bracket and front-facing webcam/microphone module (3).
The camera bracket is included in the front-facing webcam/microphone module spare part kit.
4. Detach the front-facing webcam/microphone module (4) from the camera bracket. (The front-facing
webcam/microphone module is attached to the camera bracket with double-sided adhesive.)
Display panel assembly on page
Spare part number
L03250-001
L03252-001
30).
Component replacement procedures 43