HP Compaq nx5000 series Maintenance And Service Manual page 148

Removal and Replacement Procedures
3. Remove the following screws:
❏
❏
❏
❏
Removing the Top Cover Screws
5–40
Ten T8M2.5×9.0 screws 1 along the front edge, sides,
rear corners and center of the bottom of the notebook.
Three T8M2.5x3.0 screws 2 from the MultiBay.
Two T8M2.5×3.0 screws 3 from the hard drive bay.
Two T8M2.5×5.0 screws 4 from the rear panel.
Maintenance and Service Guide