Notebook Precautions - HP Compaq nx5000 series Maintenance And Service Manual

■
Store reusable electrostatic-sensitive parts from assemblies
in protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and
roller bushings. Ensure that mechanized equipment used for
moving materials is wired to ground and that proper materials
are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.

4.6 Notebook Precautions

Use the following grounding precautions with notebooks:
■
Cover the notebook with approved static-shielding material
(refer to
■
Use a wrist strap connected to a properly grounded work
surface and use properly grounded tools and equipment.
■
Use conductive field service tools, such as cutters,
screwdrivers, and vacuums.
■
When using fixtures that must directly contact dissipative
surfaces, use only fixtures made of static-safe materials.
■
Keep the work area free of nonconductive materials, such
as ordinary plastic assembly aids and Styrofoam.
■
Handle electrostatic-sensitive components, parts, and
assemblies by the case or PCM laminate. Handle these
items only near static-free notebooks.
■
Avoid contact with pins, leads, or circuitry.
■
Turn off power and input signals before inserting or
removing connectors or test equipment.
Maintenance and Service Guide
Table 4-2 Static-Shielding
Removal and Replacement Preliminaries
Materials).
4–5