2. PRINTER SETUP
2.9.1 Fine Adjustment (Cont.)
NOTE:
1. The fine adjustment value is
not effective for the reverse
rotation.
2. The fine adjustment value is
limited depending on the
print speed.
Value
Print speed
-15 to 0
All speed
+1 to +5
8 ips or less
+6 to +10
6 ips or less
(5) TONE ADJ.(TRANS.)
Print tone for the thermal transfer printing is fine adjusted.
(6) TONE ADJ.(DIRECT.)
Print tone for the direct thermal printing is fine adjusted.
(7) RBN ADJ.<FW>
When the ribbon is slack or wrinkled and printing is affected,
fine adjust the ribbon motor torque.
E2-66
2.9 Position and Print Tone Fine Adjustment
+10
Darker
+9
+0
Standard
-19
-20
Lighter
+10
Darker
+9
+0
Standard
-19
-20
Lighter
+10
High
+9
Motor torque
-14
-15
Low
ENGLISH VERSION EO1-33094