Toshiba B-EX4T2 SERIES Owner's Manual page 36

2. PRINTER SETUP
2.6.2 Parameter Setting
(Cont.)
(16) XML
Select the type of XML data to be printed.
• OFF
Disables XML data printing.
• STD
Standard specification
• ORACLE
Oracle
• SAP
SAP
• STD EXT
Standard specification (External memory)
• ORACLE EXT Oracle using an external memory
• SAP EXT
SAP using an external memory
(17) THRESHOLD SELECT
This parameter is to choose which threshold value for the
media sensor to validate.
• REFLECT
Reflective sensor
• TRANS.
Transmissive sensor
Then, choose which value to use.
• MANUAL SET
• COMMAND SET
(18) ENERGY TYPE
This parameter is intended to make the printer perform
appropriate printing for the supplies to be used. If you use a
different supply from the setting, poor printing may occur.
• TRANSFER
Thermal transfer print method →
• DIRECT
Thermal direct print method →
When TRANSFER is selected for the Energy type parameter,
choose a ribbon type.
Case of B-EX4T2-GS/TS
• Wax1
• Wax2
• Wax3
• Semi resin1
• Semi resin2
• Semi resin3
• Resin1
• Resin2
• Reserve1 to Reserve2 Reserved
Case of B-EX4T2-HS
• Resin1
• Resin2
• Reserve1 to Reserve8 Reserved
When DIRECT is selected for the Energy type parameter
• Standard
• Reserve1 to Reserve9 Reserved
E2-22
ENGLISH VERSION EO1-33094
Threshold set in the Threshold mode
takes effect.
Threshold set by command takes effect.
Wax 1
Wax 2
Wax 3
Semi-resin 1
Semi-resin 2
Semi-resin 3
Resin 1
Resin 2
Resin 1
Resin 2
Standard
2.6 Printer Setting