Expansion Cards - HP rx3000 Series User Manual

Expansion Cards

For more information on expansion cards, refer to
"Expansion Cards."
Problem
I cannot get my
HP iPAQ
to recognize the
expansion card.
I cannot insert
my card.
I cannot remove
my SD card.
My HP iPAQ
cannot recognize
my card.
User's Guide
Solution
• Be sure you have firmly pushed the expansion card down
into the HP iPAQ.
• Be sure you have inserted the appropriate card into the
appropriate slot.
• Be sure any third-party drivers are installed.
• Be sure the label is facing the front of the unit.
• Be sure you are not inserting the card at an angle.
• Be sure you insert the connection area first.
Push the SD card in to release the locking mechanism. The card
will pop out slightly and can then be easily removed.
• Be sure you have loaded any drivers that came with the
expansion card you purchased.
• Reset the device by using the stylus to lightly press the
Reset button.
Troubleshooting
Chapter 11,
12–7