When Connect To Rear Usb Connector (Cde-174Bt Only); Connect Usb Memory; Remove Usb Memory; Mounting The Microphone - Alpine CDE-174BT User Manual

Online-store car audio and autogoods Winauto
When connect to Rear USB Connector
(CDE-174BT only)

Connect USB Memory

Connect the USB cable to the USB connector of the unit.
This unit
USB Connector

Remove USB Memory

Pull out USB Memory squarely from the USB cable.
This unit
USB Connector
Notes
• When removing USB Memory, pull it out straight.
• If sound is not output or USB Memory is not recognised even when USB
Memory is connected, remove USB Memory once, then connect it again.
• Change to a source other than the USB Memory mode, then remove the
USB Memory. If the USB Memory is removed in the USB Memory
mode, data may be damaged.
• Route the USB cable away from another cables.

Mounting the Microphone

For the sake of safety, mount the microphone in the following location.
• In a stable and secure location.
• In a location that does not inhibit safely driving the vehicle.
• Mount the microphone in a location where the driver's voice can
easily be picked up.
Choose a location for the microphone that can easily pick up the drivers
voice. Requiring the driver to move towards the microphone for
audibility causes a distraction that could be dangerous.
40
-EN
USB Memory
(sold separately)
Cable (supplied)
USB Memory
(sold separately)
Cable (supplied)