Dtmf Calls - Kenwood NEXEDGE NX-740H Instruction Manual

PRIORITY SCAN
If a Priority channel has been programmed, the transceiver will automatically
change to the Priority channel when a call is received on that channel, even if call
is being received on a normal channel.
• "P" appears on the display to indicate the Priority channel (depending on dealer setting).
TEMPORARY CHANNEL LOCKOUT
During scan, you can temporarily remove specifi c channels from the scanning
sequence by pressing the key programmed as [Scan Delete/Add] while Scan is
paused at the undesired channel.
• The channel is no longer scanned. However, when scanning is ended and restarted, the
Scan settings return to normal.
SCAN DELETE/ ADD
You can add and remove channels to and from your scan list.
1 Select your desired channel.
2 Press the key programmed as [Scan Delete/Add] to remove a channel.
• When a channel is added to scan, "cA" appears on the display. When it is removed,
"cd" appears on the display.
Note: For keypad operation, you must use an optional microphone with a keypad.
MANUAL DIALING
1 Press and hold the PTT switch.
2 Enter the desired digits using the keypad.
• If Keypad Auto-PTT is enabled by your dealer, you do not need to press the PTT
switch to transmit; you can make the call simply by pressing the keys.
AUTODIAL
Autodial allows you to quickly call DTMF numbers that have been programmed
onto your transceiver.
1 Press the key programmed as [Autodial] or the
• "Ad" appears on the display.
2 Press <B and C> to select your desired Autodial list number, or enter the list
number directly (1 ~ 9).
• "A1" (Autodial list 1) appears on the display.
3 Press the PTT switch to make the call.
REDIALING
1 Press the key programmed as [Autodial] or the
• "Ad" appears on the display.
2 Press the 0 key.
• "rd" appears on the display.
• If there is no data in the redial memory, an error tone will sound.
3 Press the PTT switch to make the call.
Note: Switching the transceiver power OFF clears the redial memory.

DTMF CALLS

key.
key.
9