Kenwood DNX7280BT Quick Start Manual page 9

Number Name
fi (Reset)
1
ATT
2
∞, 5 (Vol)
3
AUD
4
NAV
5
MENU
6
TEL
7
0 (Eject)
8
Remote
9
Sensor
Disc insert
10
slot
SD card slot
11
* T he display may not switch to the Graphic Equalizer screen in some conditions.
• If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.92).
• Switches attenuation of the volume on/off.
• Pressing for 1 second turns the screen off.
Adjusts volume.
Holding down a key turns up the volume in series up to 25. For more than
25, pressing the key turns up the volume one by one.
• Displays Graphic Equalizer screen (Instruction Manual P.82).*
• Pressing for 1 second switches camera view display on/off.
• Displays the navigation screen.
• Pressing for 1 second switches AV out sources.
• When the power off, turns the power on.
• Displays the Top Menu screen (Instruction Manual P.17).
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
• Displays the Hands Free screen (Instruction Manual P.56).
• Pressing for 1 second displays the Screen Control screen.
• When the power off, turns the power on.
• Ejects the disc.
• Pressing for 1 second opens the panel to the location of the disc slot.
When the panel is opened, pressing for 1 second closes the panel and
pressing for 3 seconds ejects the disc forcibly.
• When the panel is closed, pressing for 3 seconds fully opens the panel to
the location of the SD card slot.
• Receives the remote control signal. You can enable or disable this feature
by Remote Sensor (Instruction Manual P.67).
• If [Remote Sensor] is set to off, the remote control of TV reception is
rejected.
A slot to insert a disc media.
A slot to insert an SD card. The card is used for upgrading the map. For
how to upgrade the map, refer to the instruction manual of the navigation
system.
Also, you can play audio/visual file in the card.
9
DNX7280BT/DNX5280BT/DNX4280BT/DNX5580BT
Motion