Assembling The Top Housing - Hunter ceiling fan Instruction Manual

Assembling the Top Housing

KEEP!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
To assemble the housing to the
hanger adapter, align the three
raised tabs on the hanger adapter
with the three narrow notches in
the top housing. Make certain the
housing sits flat on the adapter.
M3535-01 • 06/18/13 • © Hunter Fan Company
Upper Motor
Cover Screw
Install three upper motor cover
screws, found in the hardware
bag, and tighten them securely.
6
www.HunterFan.com
1.888.830.1326